Extractors for HD & HR Holden's with Small Block Chev Engine
$685.00
or 4 payments of $171.25 with Info
Make 4 interest-free payments of $171.25 fortnightly and receive your order now.
SKU: ph5305
These Extractors are an Order In Product, Please Call Us if you are requiring these within 2 Weeks
May Not Fit Aftermarket Cylinder Heads, Please Call Us if in Doubt
These Extractors are for Engines that have the Alternator on the Right Hand Side
On Manual Cars you Must have a Left Hand Hydraulic Clutch Conversion
For Use with 283, 327, 350 & 400 Chev Small Block Engines
Tuned Design
Suitable for Manual & Automatic Cars
Will Fit with Slant Spark Plug Heads |
Will Fit with Powerglide Automatic |
Will Fit GM T400 Automatic if the Cars Floor has been Cut for Correct Fitment of the Automatic |
Will Not Fit with Column Automatic |
Will Not Fit with Power Steering |
Will Only Fit with Original Engine Mounting Spacers or Pacemaker Spacers (Part # PEMP 307) |
Spacers Must be Fitted on Correct side of vehicle (Right Hand Spacer is ¼" Higher than Left Hand Spacer) |
Power Steering: | No | Gasket: | DSF 9 |
Air Con: | N/A | Primary Pipe: | 1 3/4" (44mm) |
Oxy Sen: | N/A | 2nd Pipe: | - |
E.G.R: | N/A | Outlet: | 3" (76mm) |
Y Branch: | N/A | Fitting Time: | 3 Hrs |
These Extractors are an Order In Product, Please Call Us if you are requiring these within 2 Weeks
May Not Fit Aftermarket Cylinder Heads, Please Call Us if in Doubt
These Extractors are for Engines that have the Alternator on the Right Hand Side
On Manual Cars you Must have a Left Hand Hydraulic Clutch Conversion
For Use with 283, 327, 350 & 400 Chev Small Block Engines
Tuned Design
Suitable for Manual & Automatic Cars
Will Fit with Slant Spark Plug Heads |
Will Fit with Powerglide Automatic |
Will Fit GM T400 Automatic if the Cars Floor has been Cut for Correct Fitment of the Automatic |
Will Not Fit with Column Automatic |
Will Not Fit with Power Steering |
Will Only Fit with Original Engine Mounting Spacers or Pacemaker Spacers (Part # PEMP 307) |
Spacers Must be Fitted on Correct side of vehicle (Right Hand Spacer is ¼" Higher than Left Hand Spacer) |
Power Steering: | No | Gasket: | DSF 9 |
Air Con: | N/A | Primary Pipe: | 1 3/4" (44mm) |
Oxy Sen: | N/A | 2nd Pipe: | - |
E.G.R: | N/A | Outlet: | 3" (76mm) |
Y Branch: | N/A | Fitting Time: | 3 Hrs |
These Extractors are an Order In Product, Please Call Us if you are requiring these within 2 Weeks
May Not Fit Aftermarket Cylinder Heads, Please Call Us if in Doubt
These Extractors are for Engines that have the Alternator on the Right Hand Side
On Manual Cars you Must have a Left Hand Hydraulic Clutch Conversion
For Use with 283, 327, 350 & 400 Chev Small Block Engines
Tuned Design
Suitable for Manual & Automatic Cars
Will Fit with Slant Spark Plug Heads |
Will Fit with Powerglide Automatic |
Will Fit GM T400 Automatic if the Cars Floor has been Cut for Correct Fitment of the Automatic |
Will Not Fit with Column Automatic |
Will Not Fit with Power Steering |
Will Only Fit with Original Engine Mounting Spacers or Pacemaker Spacers (Part # PEMP 307) |
Spacers Must be Fitted on Correct side of vehicle (Right Hand Spacer is ¼" Higher than Left Hand Spacer) |
Power Steering: | No | Gasket: | DSF 9 |
Air Con: | N/A | Primary Pipe: | 1 3/4" (44mm) |
Oxy Sen: | N/A | 2nd Pipe: | - |
E.G.R: | N/A | Outlet: | 3" (76mm) |
Y Branch: | N/A | Fitting Time: | 3 Hrs |
Power Steering: | No | Gasket: | DSF 9 |
Air Con: | N/A | Primary Pipe: | 1 3/4" (44mm) |
Oxy Sen: | N/A | 2nd Pipe: | - |
E.G.R: | N/A | Outlet: | 3" (76mm) |
Y Branch: | N/A | Fitting Time: | 3 Hrs |
SKU | ph5305 |
Brand | Pacemaker |
Shipping Weight | 19.0000kg |
Shipping Width | 0.380m |
Shipping Height | 0.290m |
Shipping Length | 1.270m |
Shipping Cubic | 0.139954000m3 |
Help other Castlemaine Rod Shop users shop smarter by writing reviews for products you have purchased.
Extractors for HD & HR Holden's with Small Block Chev Engine
$685.00
or 4 payments of $171.25 with Info
Make 4 interest-free payments of $171.25 fortnightly and receive your order now.
$750.00
or 4 payments of $187.50 with Info
Make 4 interest-free payments of $187.50 fortnightly and receive your order now.
Extractors for LS1, LS2, LS3, LSA & LSX Engines into HK Holden's
From $990.00
or 4 payments of $247.50 with Info
Make 4 interest-free payments of $247.50 fortnightly and receive your order now.
$475.00
or 4 payments of $118.75 with Info
Make 4 interest-free payments of $118.75 fortnightly and receive your order now.
$605.00
or 4 payments of $151.25 with Info
Make 4 interest-free payments of $151.25 fortnightly and receive your order now.
$500.00
or 4 payments of $125.00 with Info
Make 4 interest-free payments of $125.00 fortnightly and receive your order now.
Pacemaker Extractors (Tri-Y Design) for HK, HT & HG Holden's to 253 & 308 Holden V8
$755.00
or 4 payments of $188.75 with Info
Make 4 interest-free payments of $188.75 fortnightly and receive your order now.
Pacemaker Extractors (Tuned Design) for HK, HT & HG Holden's to 253 & 308 Holden V8 Engines
$875.00
or 4 payments of $218.75 with Info
Make 4 interest-free payments of $218.75 fortnightly and receive your order now.
$635.00
or 4 payments of $158.75 with Info
Make 4 interest-free payments of $158.75 fortnightly and receive your order now.
LS Exhaust System for HK, HT & HG Holden Sedan's or Monaro's
$960.00
or 4 payments of $240.00 with Info
Make 4 interest-free payments of $240.00 fortnightly and receive your order now.