More info
LS Exhaust System for VB, VC, VH, VK & VL Holden's
$880.00
or 4 payments of $220.00 with
Info
Make 4 interest-free payments of $220.00 fortnightly and receive your order now.
9" Diff for 1964, 1965 & 1966 Ford Mustangs
SKU: 9dfmu66
This Product is Fabricated On-Site
Current Build time can be from 12 to 24 Weeks
PLEASE Call Us on 03 5472 2853 If this is a Concern
Mounts Using Factory Mounting Points
These Diff's are Rated between 800 & 900 RWHP
Full Spool Diff's are Recommended for Off Road use ONLY.
Will Require Modifications to the Tailshaft or a New One
Factory Standard Sway Bar Can be Used (Not Supplied)
Minimum and Maximum Widths are Listed Below, It is YOUR Responsibility that the Measurements ARE Correct as We DO NOT Accept Returns when the Length IS NOT the Maximum (Standard) Width
Refer to Images on How to Measure the Diff Width Correctly
Included
| USA Manufactured Axles (31 Spline), 1541 Forged Induction Heat Treated |
| 10mm Heavy Duty Flanges |
| 1350 Yoke |
| 5mm Thick Axle Tubes |
| Ratio of Your Choice (Refer Below) |
| Choice of Drum or Wilwood Disc Brakes (Refer Below) |
| Suspension Mounts |
| 3" long 1/2" ARP Wheel Studs |
| CNC Laser Cut and Bent Brackets |
| Billet CNC Machined Ends |
| Super Heavy Duty 6mm thick Smooth Back Centre Housing |
Not Included
| Rear Brake Lines |
| Handbrake Cable |
| Sway Bar |
Brake Packages
| Drum - Minimum 14" Wheel Diameter | |
Diameter: 280mmWidth: 92mm |
|
| Wilwood 280 Kit - Minimum 14" Wheel Diameter | |
Calipers Black or Red4 PistonDust Booted |
Rotors Diameter: 280mmWidth: 20.5mm |
| Wilwood 320 Kit - Minimum 15" Wheel Diameter | |
Calipers Black or Red4 PistonDust Booted |
Rotors Diameter: 310mmWidth: 20.5mm |
Widths
| Maximum (Standard) | Minimum |
| 1457mm | 1395mm |
Mounts Using Factory Mounting Points
These Diff's are Rated between 800 & 900 RWHP
Full Spool Diff's are Recommended for Off Road use ONLY.
Will Require Modifications to the Tailshaft or a New One
Factory Standard Sway Bar Can be Used (Not Supplied)
Minimum and Maximum Widths are Listed Below, It is YOUR Responsibility that the Measurements ARE Correct as We DO NOT Accept Returns when the Length IS NOT the Maximum (Standard) Width
Refer to Images on How to Measure the Diff Width Correctly
Included
| USA Manufactured Axles (31 Spline), 1541 Forged Induction Heat Treated |
| 10mm Heavy Duty Flanges |
| 1350 Yoke |
| 5mm Thick Axle Tubes |
| Ratio of Your Choice (Refer Below) |
| Choice of Drum or Wilwood Disc Brakes (Refer Below) |
| Suspension Mounts |
| 3" long 1/2" ARP Wheel Studs |
| CNC Laser Cut and Bent Brackets |
| Billet CNC Machined Ends |
| Super Heavy Duty 6mm thick Smooth Back Centre Housing |
Not Included
| Rear Brake Lines |
| Handbrake Cable |
| Sway Bar |
Brake Packages
| Drum - Minimum 14" Wheel Diameter | |
Diameter: 280mmWidth: 92mm |
|
| Wilwood 280 Kit - Minimum 14" Wheel Diameter | |
Calipers Black or Red4 PistonDust Booted |
Rotors Diameter: 280mmWidth: 20.5mm |
| Wilwood 320 Kit - Minimum 15" Wheel Diameter | |
Calipers Black or Red4 PistonDust Booted |
Rotors Diameter: 310mmWidth: 20.5mm |
Widths
| Maximum (Standard) | Minimum |
| 1457mm | 1395mm |
Mounts Using Factory Mounting Points
These Diff's are Rated between 800 & 900 RWHP
Full Spool Diff's are Recommended for Off Road use ONLY.
Will Require Modifications to the Tailshaft or a New One
Factory Standard Sway Bar Can be Used (Not Supplied)
Minimum and Maximum Widths are Listed Below, It is YOUR Responsibility that the Measurements ARE Correct as We DO NOT Accept Returns when the Length IS NOT the Maximum (Standard) Width
Refer to Images on How to Measure the Diff Width Correctly
Included
| USA Manufactured Axles (31 Spline), 1541 Forged Induction Heat Treated |
| 10mm Heavy Duty Flanges |
| 1350 Yoke |
| 5mm Thick Axle Tubes |
| Ratio of Your Choice (Refer Below) |
| Choice of Drum or Wilwood Disc Brakes (Refer Below) |
| Suspension Mounts |
| 3" long 1/2" ARP Wheel Studs |
| CNC Laser Cut and Bent Brackets |
| Billet CNC Machined Ends |
| Super Heavy Duty 6mm thick Smooth Back Centre Housing |
Not Included
| Rear Brake Lines |
| Handbrake Cable |
| Sway Bar |
Brake Packages
| Drum - Minimum 14" Wheel Diameter | |
Diameter: 280mmWidth: 92mm |
|
| Wilwood 280 Kit - Minimum 14" Wheel Diameter | |
Calipers Black or Red4 PistonDust Booted |
Rotors Diameter: 280mmWidth: 20.5mm |
| Wilwood 320 Kit - Minimum 15" Wheel Diameter | |
Calipers Black or Red4 PistonDust Booted |
Rotors Diameter: 310mmWidth: 20.5mm |
Widths
| Maximum (Standard) | Minimum |
| 1457mm | 1395mm |
| SKU | 9dfmu66 |
| Brand | Castlemaine Rod Shop |
| Shipping Weight | 83.0000kg |
| Shipping Width | 0.420m |
| Shipping Height | 0.420m |
| Shipping Length | 1.650m |
| Shipping Cubic | 0.291060000m3 |
Be The First To Review This Product!
Help other Castlemaine Rod Shop users shop smarter by writing reviews for products you have purchased.
Others Also Bought
Wilwood Front Disc Brake Conversion for VL Holden
From $1,800.00
or 4 payments of $450.00 with
Info
Make 4 interest-free payments of $450.00 fortnightly and receive your order now.
Front Brake Lines (Wilwood Calipers or Calipers with a 1/8"-27 Inlet Thread Size) for Ford Mustang's
$198.00
or 4 payments of $49.50 with
Info
Make 4 interest-free payments of $49.50 fortnightly and receive your order now.
IFS Front End for Ford Mustang's
From $4,500.00
Make 4 interest-free payments of $1,125.00 fortnightly and receive your order now.
Alternator High Mount & Power Steering Relocation Kit for Ford BA, BF & FG 6 Cyl (Barra) Engines
From $350.00
or 4 payments of $87.50 with
Info
Make 4 interest-free payments of $87.50 fortnightly and receive your order now.
More From This Category
From $3,500.00
Make 4 interest-free payments of $875.00 fortnightly and receive your order now.
From $3,500.00
Make 4 interest-free payments of $875.00 fortnightly and receive your order now.
From $3,500.00
Make 4 interest-free payments of $875.00 fortnightly and receive your order now.
9" Diff with 4 Link for HQ Holden (Sedan, Coupe or Station Wagon)
From $4,500.00
Make 4 interest-free payments of $1,125.00 fortnightly and receive your order now.
Lower Trailing Rear Control Arms for HQ, HJ, HX, HZ & WB Holdens
$250.00
or 4 payments of $62.50 with
Info
Make 4 interest-free payments of $62.50 fortnightly and receive your order now.
From $3,500.00
Make 4 interest-free payments of $875.00 fortnightly and receive your order now.
4 Link Rear Suspension Kit for VT, VX, VY & VZ Holden's
From $2,950.00
or 4 payments of $737.50 with
Info
Make 4 interest-free payments of $737.50 fortnightly and receive your order now.
From $3,500.00
Make 4 interest-free payments of $875.00 fortnightly and receive your order now.
